Gallery — HPE

Skip to Content

Servicing and Maintenance

Corner weight and Geo

Suspension Refresh

Rolling road tuning

Sport 160 upgrade

Brembo caliper rebuild

Honda conversion

Previous Builds

S2 Road and track toy

S1 Lightweight track toy

S1 2.2 Road car

S1 Exige 2.2 k20

S1 Exige tarmac rally car

Servicing and Maintenance

Corner weight and Geo

Suspension Refresh

Rolling road tuning

Sport 160 upgrade

Brembo caliper rebuild

Honda conversion

Previous Builds

S2 Road and track toy

S1 Lightweight track toy

S1 2.2 Road car

S1 Exige 2.2 k20

S1 Exige tarmac rally car

Folder: What we do

Servicing and Maintenance

Corner weight and Geo

Suspension Refresh

Rolling road tuning

Sport 160 upgrade

Brembo caliper rebuild

Honda conversion

Folder: Previous Builds

S2 Road and track toy

S1 Lightweight track toy

S1 2.2 Road car

S1 Exige 2.2 k20

S1 Exige tarmac rally car

S2 radio delete panel with gauge mounts (Copy)

300hp, 212lb ft, 700 kilos....this thing is an animal!

Good job these aren't an absolute pain in the ring to install...

Sailed through the MOT....wouldn't expect anything less.

Suspension refresh of my own car mid way through... (Copy)

Setting cam timing...this is critical, 1mm of clearance only between the valve and piston with full advance.

2Bular manifold boxed in (Copy)

Rolling road tuning the 2.2 (Copy)

A 2.2l K20 with Clockwise Motion ITB's (Copy)

both of these cars have 300hp

Rebuilding a K20 box with LSD (Copy)

Checking preload (Copy)

Baffled sump (Copy)

Clean block (Copy)

Check bearing tolerances (Copy)

Forged pistons (Copy)

Oil pressure relief spring & plunger (Copy)

Oil pump fitted (Copy)

Sump on! (Copy)

Bottom end complete (Copy)

Vernier exhaust wheel (Copy)

Rebuilt head (Copy)

Chambered to 87mm (Copy)

Spring bases (Copy)

Valve clearance check (Copy)

Head on! (Copy)

Cam timing (Copy)

Nearly there... (Copy)

Finished engine (Copy)

Remote oil cooler hoses (Copy)

Header tank relocated (Copy)

Neat wiring! (Copy)

Tidy install (Copy)

Another honda powered elise... (Copy)

Suspension refresh (Copy)

Bright! (Copy)

Red wishbones look cool (Copy)

Roll cage install (Copy)

Tight fit (Copy)

Exhaust porn (Copy)

Honda MR2 anyone? (Copy)

S2 radio delete panel with gauge mounts (Copy)

300hp, 212lb ft, 700 kilos....this thing is an animal!

Good job these aren't an absolute pain in the ring to install...

Sailed through the MOT....wouldn't expect anything less.

Suspension refresh of my own car mid way through... (Copy)

Setting cam timing...this is critical, 1mm of clearance only between the valve and piston with full advance.

2Bular manifold boxed in (Copy)

Rolling road tuning the 2.2 (Copy)

A 2.2l K20 with Clockwise Motion ITB's (Copy)

both of these cars have 300hp

Rebuilding a K20 box with LSD (Copy)

Checking preload (Copy)

Baffled sump (Copy)

Clean block (Copy)

Check bearing tolerances (Copy)

Forged pistons (Copy)

Oil pressure relief spring & plunger (Copy)

Oil pump fitted (Copy)

Sump on! (Copy)

Bottom end complete (Copy)

Vernier exhaust wheel (Copy)

Rebuilt head (Copy)

Chambered to 87mm (Copy)

Spring bases (Copy)

Valve clearance check (Copy)

Head on! (Copy)

Cam timing (Copy)

Nearly there... (Copy)

Finished engine (Copy)

Remote oil cooler hoses (Copy)

Header tank relocated (Copy)

Neat wiring! (Copy)

Tidy install (Copy)

Another honda powered elise... (Copy)

Suspension refresh (Copy)

Bright! (Copy)

Red wishbones look cool (Copy)

Roll cage install (Copy)

Tight fit (Copy)

Exhaust porn (Copy)

Honda MR2 anyone? (Copy)

HPE Automotive 13 Mill Lane Wildmoor Mill, Bromsgrove, B61 0BX United Kingdom dan@hpeauto.co.uk